Review of the Control System of the Tokiwa W500 Packing Machine at PT. Indofood CBP Sukses Makmur, Semarang Noodle Division
DOI:
https://doi.org/10.62951/ijcts.v3i1.350Keywords:
Automation, Control System, ICBP, Packing Machine, TokiwaAbstract
The selection of this research topic is based on the important role of packing machines in the noodle production process. As consumer demand continues to increase and industrial competition becomes more intense, optimizing production efficiency is a critical requirement for manufacturing companies. This study focuses on the Tokiwa W500 Packing Machine used at PT. Indofood CBP Sukses Makmur, Noodle Division, Semarang. The research method involves a comprehensive review of the machine control system to evaluate its operational performance. Data collection was conducted through direct observation, structured interviews with machine operators, and relevant literature review. The review emphasizes system performance, operational efficiency, and the level of automation, while identifying potential areas for improvement. The results indicate that the Tokiwa W500 Packing Machine operates in a stable and consistent manner during the noodle packaging process. However, opportunities were identified to enhance the automation system in order to improve production efficiency and reduce the risk of human error. This study is expected to contribute to the development of more effective and optimized control systems for industrial packing machines.
References
Alcon, F., de-Miguel, M. D., & Burton, M. (2014). (2024). This document is discoverable and free to researchers across the globe due to the work of AgEcon Search. Help ensure our sustainability. A ctors influencing price of agricultural products and stability count. AgEcon Search, 1-26. https://doi.org/10.7160/aol.2024.160206.Introduction
Anggrainy, S. D., Abizar, H., Manendro, J., & Utomo, B. (2025). Direct On Line Circuit as a 3 Phase Motor Controller Using the Siemens S7 1200 Programmable Logic Controller Circuit Testing Success or Failure. 12(2). https://doi.org/10.21107/triac.v12i2.32088
Formentini, G., Favi, C., Moroni, F., & Pirondi, A. (2021). Engineering design in food-packaging industry: The case study of a tuna canning machine. Procedia CIRP, 100(March), 229-234. https://doi.org/10.1016/j.procir.2021.05.060 https://doi.org/10.1016/j.procir.2021.05.060
Friederich, J., & Lazarova-Molnar, S. (2024). Reliability assessment of manufacturing systems: A comprehensive overview, challenges and opportunities. Journal of Manufacturing Systems, 72(July 2023), 38-58. https://doi.org/10.1016/j.jmsy.2023.11.001 https://doi.org/10.1016/j.jmsy.2023.11.001
Hwa, L. S., & Chuan, L. Te. (2024). A Brief Review of Artificial Intelligence Robotic in Food Industry. Procedia Computer Science, 232, 1694-1700. https://doi.org/10.1016/j.procs.2024.01.167 https://doi.org/10.1016/j.procs.2024.01.167
Kondakci, T., & Zhou, W. (2017). Recent Applications of Advanced Control Techniques in Food Industry. Food and Bioprocess Technology, 10(3), 522-542. https://doi.org/10.1007/s11947-016-1831-x https://doi.org/10.1007/s11947-016-1831-x
Luo, D. (2022). Design and implementation of automatic packing machine system based on PLC. 2(1), 2-4. https://doi.org/10.54097/fcis.v2i1.3183
Mahbubah, N. A., Muid, A., & Rahmatulloh, R. (2021). Evaluation Of Defects In The Instant Noodle Packaging Process Using Failure Mode And Effect Analysis Method Evaluation Of Instant Noodle Packaging Quality Using Failure Mode And Effect Analysis Method. Proceedings of the International Conference on Industrial & Mechanical Engineering and Operations Management Dhaka, 26-27. https://www.researchgate.net/publication/358742298
Minh, T. V., Noi, H., Engineering, M., Viet, C., Khoa, B., & Ba, H. (2023). Design of an automated plastic bag packaging machine. 35-38. https://doi.org/10.22306/atec.v9i1.166
Purba, A. P. P., Ahmad, N. Ha., Yahya, A. K., Miftahurrahmah, Sitorus, T. M., & Sahaq, A. B. (2024). The Packaging Process Improvement in MSME's by Utilizing Packaging Machine Technology and Product Packaging Redesign. Jati Emas (Jurnal Aplikasi Teknik Dan Pengabdian Masyarakat), 8(4), 131-136.
Purnomo, R. A., Sartika, R. C., Juwita, A. H., Chamidah, S., Hartono, S., & Nguyen, T. T. T. (2025). The Effect of Product Packaging Innovation, Branding, and Technological Capability on MSME Performance: A Case Study of Fresh Noodle Producers in The Madiun Residency. Indonesian Journal of Business and Entrepreneurship, 11(1), 1-15. https://doi.org/10.17358/ijbe.11.1.1 https://doi.org/10.17358/ijbe.11.1.1
Puspita Sari, D., Tri Parwati, S., Ika Rinawati, D., & Wicaksono, P. A. (2018). Analysis of Scraps Cause of Noodle Production in PT. Indofood CBP Success Makmur Tbk. using Fault Tree Analysis Methods. SHS Web of Conferences, 49, 02012. https://doi.org/10.1051/shsconf/20184902012 https://doi.org/10.1051/shsconf/20184902012
Rizki, M., & Eka, S. (n.d.). Design and Implementation of a Three-Phase Half-Wave Uncontrolled Rectifier for Enhancing Rural Livelihoods through Single-Phase AC Motor Applications. xx(xx).
Shaik, Z. B., & Peddakrishna, S. (2025). Design and implementation of electric vehicle with autonomous motion and steering control system using single board computer and sensors. Results in Engineering, 25(December 2024). https://doi.org/10.1016/j.rineng.2025.103995 https://doi.org/10.1016/j.rineng.2025.103995
STANKOV, S., ANTIĆ, D., & ... (2017). Control and Monitoring System of the Mineral Wool Packaging Process. Annals of the Faculty …, 43-46. http://search.ebscohost.com/login.aspx?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=15842665&AN=124809688&h=nrsqV6RXGIK6i1npnh2sF89wfL%2FTOtJbH%2FbV0loLmZYTZThWl3vvgqwRoyRB2nfgvEtvj38UQt07i8QbVNlN6Q%3D%3D&crl=c
Sun, X., & Li, Y. (2010). Evaluation of control system performance using multiple criteria decision making techniques. Proceedings of the IEEE Conference on Decision and Control, 3718-3723. https://doi.org/10.1109/CDC.2010.5717809 https://doi.org/10.1109/CDC.2010.5717809
Tan, Y., Ni, H., Wu, T., Wang, Q., Zeng, H., & Wang, Y. (2025). Harnessing advanced biotechnology and information technology towards smart manufacture of future foods: a review. Journal of Future Foods. https://doi.org/10.1016/j.jfutfo.2025.11.007 https://doi.org/10.1016/j.jfutfo.2025.11.007
Tannady, H., Gunawan, E., Nurprihatin, F., & Wilujeng, F. R. (2019). Process improvement to reduce waste in the biggest instant noodle manufacturing company in South East Asia. Journal of Applied Engineering Science, 17(2), 203-212. https://doi.org/10.5937/jaes17-18951 https://doi.org/10.5937/jaes17-18951
Xiangdong, Z. (2018). Study on the packaging quality stability of paper-packaging machines for Chinese dried noodles. 34(12). https://doi.org/10.13652/j.issn.1003-5788.2018.12.017
Yang, P. B., Chan, Y. J., Yazdi, S. K., & Lim, J. W. (2024). Optimisation and economic analysis of industrial-scale anaerobic co-digestion (ACoD) of palm oil mill effluent (POME) and decanter cake (DC) using machine learning models: A comparative study of Gradient Boosting Machines (GBM), K-nearest neighbours (KNN). Journal of Water Process Engineering, 58(October 2023), 104752. https://doi.org/10.1016/j.jwpe.2023.104752 https://doi.org/10.1016/j.jwpe.2023.104752
Yunzhang, W. U., & Liang, C. (2016). Timing analysis and methods to improve the speed of the packaging machine. 32(10). https://doi.org/10.13652/j.issn.1003-5788.2016.10.020
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 International Journal of Computer Technology and Science
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
